Custom MIG, TIG, FCAW & Stick Welding Services
(Click on thumbnail to enlarge)
With the ability to process materials up to 3 and 1/2 of an inch thick, our custom MIG, TIG, FCAW & Stick welding services cater to lighter gauge and structural components, and can be used on a variety of products including tubular frames, to light gauge welded assemblies. Specializing in aluminum and stainless steel and mild steel manufacturing, our free hand welding process can also work with a broad range of alternate materials such as bronze, copper, and brass.
Multimetal Products Corporation has a large welding staff that is able to tackle any project no matter the size.
We offer a wide range of arc/resistance welding processes, including (but not limited to) FCAW (Flux Core Arc Welding), GMAW (Gas Metal Arc Welding) and SMAW (Shielded Metal Arc Welding). Our MIG, TIG, and Stick welding services are always ISO compliant and meet with high industry standards. Please ask us about our additional service offerings which include research and development, prototyping, and engineering.
Example Custom Welding Projects
Custom Welding Capabilities:
|General Welding Capabilities|
|Arc/Resistance Welding Processes|
- FCAW (Flux Core Arc Welding)
This process uses similar equipment as GMAW but in place of standard solid wire uses wire consisting of a steel electrode surrounding a powder fill material.
- GMAW (Gas Metal Arc Welding)
Also known as metal inert gas or MIG welding.
- GTAW (Gas Tungsten Arc Welding)
Also known as Tungsten Inert Gas (TIG) welding. This process uses a non consumable tungsten electrode, an inert gas and a separate filler material. This process is sometimes mistakenly referred to as Heliarc welding.
Metal Inert Gas welding, also referred to as Gas Metal Arc Welding.
Resistance welding is a process where heat is generated by passing current through the resistance caused by the contact between two or more metal surfaces to be joined.
- SMAW (Shielded Metal Arc Welding)
Also known as Manual Metal Arc Welding or Stick welding. This process uses a consumable electrode rod, which as the filler material, that is covered in flux that protects the weld area from oxidation and contamination.
Spot welding is form of resistance welding used to join overlapping metal sheets. Two electrodes are used to clamp the sheets together and pass the current between them.
Stud welding is a form of Spot welding where a bolt or weld nut is welded to another metal part. The bolts are often fed automatically into the welder.
Tungsten Inert Gas welding. Also referred to as Gas Tungsten Arc Welding.
- Mild steel
- Cast Iron
- Exotic Metals
- Stainless Steel
|Industry Standards Met|
- ISO - Compliant (International Organization for Standardization)
- Dissimilar Metals
- Frame Work
- Hard Face
- High Purity Clean Room
- Miniature Stud
- Narrow Groove
- Precision Assembly
- Seam Welded Tube
- Tubular Frame
- Point of purchase
- Rail Road/Locomotive
- Research and Development
|File Formats Accepted|
- AutoCAD (DWG,DWZ)
- BMP (Bit Mapped Graphics)
- DXF (Drawing Interchange Format, or Drawing Exchange Format)
- GIF (Graphics Interchange Format)
- IGES (Initial Graphics Exchange Specification, ANSI file format.)
- Pro-E or Pro/Engineer (DRW,PRT,XPR)
- SolidEdge (DFT)
- SolidWorks (SLDPRT,SLDDRW,SLDDRT)
^ Back to top